Hazcam Intelligent Access Point includes the Jetson Nano or Xavier NX platforms for AI processing at the edge.
Features:
- 4G/LTE WWAN including external mast antenna
- Wifi Access Point and Client modes (b/g/n - 2.4GHz)
- 4 port PoE Gigabit Switch (802.3af) for 4 x PoE Network Cameras
- Auto power on with power alarm and UPS backup
- GPS / GNSS
Hazcam Intelligent Access Point provides options for the second generation Nano Development Kit carrier board or the Jetson Xavier NX Development kit.
Hazcam Intelligent Access Point is a rapid commercilization solution for early stage product development and deployment of AI applications utilising the Nvidia Jetson Nano Platforms.
Hazcam enclosures are waterproof, IP67 rated, fanless, Aluminium sealed enclosures that ensure the Jetson platform will operate continuously at full load in even the harshest environments.
Please email us at sales at hazcam dot io to enquire about quantity discounts or custom designs to suit your specific requirements.
Detailed Specifications
Power over Ethernet Switch |
||
4 x LAN |
10/100/1000Mbps 802.3af compliant Gigabit PoE Network Ports Mac Address Auto-Learning And Auto-Aging IGMP Snooping AUTO Negotiation/AUTO MDI/MDIX EEE802.3x Flow Control Store-And-Forward |
|
Isolation |
1500V Galvanic Isolation on all PoE Ports |
|
Network |
||
Routing |
Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, RIPng, OSPF6) |
|
Network protocols |
TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPnP, SSH, DHCP, Telnet, SMNP, MQTT, Wake On Lan (WOL) |
|
VoIP passthrough support |
H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets |
|
Connection monitoring |
Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection |
|
Firewall |
Port forward, traffic rules, custom rules |
|
DHCP |
Static and dynamic IP allocation, DHCP Relayd |
|
QoS |
Traffic priority queuing by source/destination, service, protocol or port, traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e, 802.1p/DSCP QoS |
|
Supported >25 service providers, others can be configured manually |
||
WiFi b/g/n |
|
Wireless mode |
IEEE 802.11b/g/n, Access Point (AP), Station (STA) |
WiFi |
WPA2-Enterprise (with external/internal Radius server), WPA2-PSK, WPA-PSK, WEP, MAC Filter |
WiFi security |
WPA2-Enterprise - PEAP, TLS, TTLS, AES-CCMP, TKIP, Auto Cipher modes, Client separation |
SSID |
SSID stealth mode and access control based on MAC address |
WiFi users |
Up to 50 simultaneous connections |
Wireless Hotspot |
Captive portal (Hotspot), internal/external Radius server, built in customizable landing page |
Mobile 4G/LTE |
|
Mobile module |
4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps |
Status |
Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP Bytes sent/received |
Bridge |
Direct connection (bridge) between mobile ISP and device on LAN |
Passthrough |
Router assigns its mobile WAN IP address to another device on LAN |
APN |
Auto APN |
SMS |
SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP |
Black/White list |
Operator black/white list |
Multiple PDN (optional) |
Possibility to use different PDNs for multiple network access and services |
Band management |
Band lock, Used band status display |
Mobile 4G/LTE Supported Bands by Region
Product Code |
Region (Operator) |
..Supported Bands |
||
Region *0**** |
Europe, the Middle East, Africa, Korea, Thailand, India |
4G (LTE-FDD): B1 (2100 MHz), B3 (1800 MHz), B5 (850 MHz), B7 (2600 MHz), B8 (900 MHz), B20 (800 MHz) 3G: B1 (2100 MHz), B5 (850 MHz), B8 (900 MHz) 2G: B3 (1800 MHz), B8 (900 MHz) |
||
Region *1**** |
North America (AT&T, Bell, T-Mobile)1 |
4G (LTE-FDD): B2 (1900 MHz), B4 (1700 MHz), B12 (700 MHz) 3G: B2 (1900 MHz), B4 (1700 MHz), B5 (850 MHz) |
||
Region *2**** |
North America (Verizon) |
4G (LTE-FDD): B4 (1700 MHz), B13 (700 MHz) |
||
Region *3**** |
Australia (Telstra) |
4G (LTE-FDD): B1 (2100 MHz), B3 (1800 MHz), B5 (850 MHz), B7 (2600 MHz), B28 (700 MHz) 3G: B1 (2100 MHz), B5 (850 MHz) |
||
Region *4**** |
South America, Australia, New Zealand, Taiwan |
4G (LTE-FDD): B1 (2100 MHz), B22 (1900 MHz), B3 (1800 MHz), B4 (1700 MHz), B5 (850 MHz), B7 (2600 MHz), B8 (900 MHz), B28 (700 MHz) 3G: B1 (2100 Mhz), B2 (1900 Mhz), B5 (850 Mhz), B8 (900 MHz) 2G: B2 (1900 MHz), B3 (1800 MHz), B5 (850 MHz), B8 (900 MHz) |
||
Region *5**** |
Japan |
4G (LTE-FDD): B1 (2100 MHz), B3 (1800 MHz), B8 (900 MHz), B18 (850 MHz), B19 (800 MHz), B26 (850 MHz) 3G: B1 (2100 MHz), B6 (800 MHz), B8 (900 MHz), B19 (800 MHz) |
||
Region *6**** |
Europe, the Middle East, Africa, Korea, Thailand, Malaysia |
4G (LTE-FDD): B1 (2100 MHz), B3 (1800 MHz), B7 (2600 MHz), B8 (900 MHz), B20 (800 MHz), B28A (700 MHz) 3G: B1 (2100 MHz), B8 (900 MHz) 2G: B3 (1800 MHz), B8 (900 MHz) |
||
Region *7**** |
Global |
4G (LTE-FDD): B1 (2100 MHz), B2 (1900 MHz), B3 (1800 MHz), B4 (1700 MHz), B5 (850 MHz), B7 (2600 MHz), B8 (900 MHz), B12 (700 MHz), B13 (1800 MHz), B18 (850 MHz), B19 (800 MHz), B20 (800 MHz), B25 (1900 MHz), B26 (850 MHz), B28 (700 MHz) 3G: B1 (2100 MHz), B2 (1900 MHz), B4 (1700 MHz), B5 (850 MHz), B6 (800 MHz), B8 (900 MHz), B19 (800 MHz) 2G: B2 (1900 MHz), B3 (1800 MHz), B5 (850 MHz), B8 (900 MHz) |
||
GPS/GNSS |
|
|||
Satellite Systems |
GPS, Glonass, Beidou, Galileo |
|
||
Security |
|
Authentication |
Pre-shared key, digital certificates, X.509 certificates |
Firewall |
Pre-configured firewall rules can be enabled via web-ui, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T |
Attack prevention |
DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention ( SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks) |
WiFi security |
WPA2-Enterprise – PEAP, EAP-TLS, TLS, TTLS. AES-CCMP, TKIP, Auto Cipher modes, Client separation |
VLAN |
Tag based VLAN separation |
Mobile quota control |
Set up custom data limits for the SIM card |
WEB filter |
Blacklist for blocking out unwanted websites, whitelist for specifying allowed sites only |
Access control |
Flexible access control of TCP, UDP, ICMP packets, MAC address filter |
VPN |
|
OpenVPN |
Multiple clients and server can be running simultaneously, 12 encryption methods |
OpenVPN Encryption |
DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC |
IPsec |
IKEv1, IKEv2, supports up to 4 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256) |
GRE |
GRE tunnel |
PPTP, L2TP |
Client/Server services can run simultaneously |
Stunnel |
Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the programs' code |
SSTP |
SSTP client instance support |
ZeroTier |
ZeroTier VPN |
Management |
|
SSH |
SSH (v1, v2) |
SMS |
SMS status, SMS configuration, send/read SMS via HTTP POST/GET |
Call |
Reboot, Status, WiFi on/off, Mobile data on/off, Output on/off |
TR-069 |
OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem |
MQTT |
MQTT Broker, MQTT publisher |
SNMP |
SNMP (v1, v2, v3), SNMP trap |
JSON-RPC |
Management API over HTTP/HTTPS |
MODBUS |
MODBUS TCP status/control |
Power |
|
Connector |
3 pin industrial DC power socket |
Input voltage range |
12 – 13.8 VDC (3 pin industrial socket), reverse polarity protection, surge protection |
PoE |
Active PoE IEEE802.3af Compliant. 12.95W per port (peak 15.4W) |
Power consumption |
Maximum 96 W under full PoE Load Nominal power consumption 15W with no PoE Loads |
Current range |
0.1A to 10A |
Voltage range |
12.8 to 13.8V DC |
Voltage Sense |
Shutdown mode initiated when external DC voltage is removed, e.g. vehicle ignition switch OFF Auto UPS power applied during shutdown sequence Shutdown sequence aborted if external power is re-applied Shutdown cycle time approximately 60 seconds (configurable) |
Interfaces |
|
Ethernet |
4 x RJ45 ports, 10/100/1000 Mbps, with threaded cable cover (IP67) with Power over Ethernet 802.3af |
Status LEDs |
Optional 1 x Power LED via Illuminated Power Switch |
Power Switch |
Optional Can be configures as Power, Reset or Reflash (Default mode set to Reset) |
SIM |
Internal, 1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V |
MicroSD |
Internal, microSD for operating system and storage |
Power |
3 pin DC panel connector with threaded cable cover (IP67) |
Antennas |
1 x N-Type Female for LTE omni-directional external antenna, 1 x N-Type Female for WiFi omni-directional external antenna included, GPS/GNSS embedded, LTE diversity antenna embedded |
USB3 |
Optional USB3 panel connector with dustcap |
Operating Environment |
|
Operating temperature |
-25 °C to 60 °C |
Operating humidity |
10% to 90% non-condensing |
Ingress Protection Rating |
IP67 Enclosure Rating |
Processor and GPU and Storage for Jetson Nano Option |
|
GPU |
128-core Maxwell |
CPU |
CPU Quad-core ARM A57 @ 1.43 GHz |
Memory |
Memory 4 GB 64-bit LPDDR4 25.6 GB/s Storage 16 GB eMMC 5.1 |
Video |
Video Encode 4K @ 30 | 4x 1080p @ 30 | 9x 720p @ 30 (H.264/H.265) Video Decode 4K @ 60 | 2x 4K @ 30 | 8x 1080p @ 30 | 18x 720p @ 30 (H.264/H.265) |
Internal Interfaces |
CSI 12 (3x4 or 4x2) lanes MIPI CSI-2 D-PHY 1.1 Display HDMI 2.0, eDP 1.4, DP 1.2 (two simultaneously) PCIe 1x1/2/4 PCIe Gen2 USB 1x USB 3.0, 3x USB 2.0 Others I 2 C, I2 S, SPI, UART, SD/SDIO, GPIO |
Processor and GPU and Storage for Jetson Xavier NX Option |
|
GPU |
384-core Volta GPU @ 1100MHz with 64 Tensor Cores |
CPU |
6-core NVIDIA Carmel ARMv8.2 CPU @ 1400MHz (up to 1900MHz in dual-core mode) |
Memory / Storage |
8GB 128-bit LPDDR4x @ 1600MHz (51.2GB/s) 16GB eMMC 5.1 |
Video |
(2x) 4Kp30 H.264/H.265 video encoder |
Internal Interfaces |
(14x) MIPI CSI-2 lanes, 3x4 or 6x2 cameras
|